Paradyne Jetstream CPX-1000 Installation Manual page 131

1000-A2-GN20-00
tap
vpath
September 2002
Cpx> tap — Shows currently configured taps
Cpx> tap on <timeslot> <T1/E1card> <T1/E1port>
<ds0> — Monitor <timeslot> on the specified E1 DS0
Cpx> tap off <timeslot> — Disable existing tap on
<timeslot>
<timeslot> = H.110 timeslot to tap (0-4095, get
from sub or crv displays)
<T1/E1card> = E1 card used to tap (1-N, counted
from left to right)
<T1/E1port> = E1 port on <T1/E1card> used to tap
(1-8 = Port A-H)
<ds0> = DS0 on <T1/E1port> used to tap (1-24)
Cpx> vpath all — Displays all active voice
paths in the system
Cpx> vpath <timeslot> — Displays the voice
path associated with <timeslot>
<timeslot> = H.110 timeslot (0-4095, get from
sub or crv displays)
Console User Commands
C-11