1000-A2-GN20-00
Installing a
Module
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
September 2002
Caution
Insert the fan/power supply module with a single, steady
motion. Bouncing the module during insertion can cause an
alarm condition in the system. Also, do not force the module
into the slot.
To avoid crushing or bending the power supply pins, back
the module out, and re-insert it if it does not fully insert into the
slot. Do not slam the power supplies into the shelf.
Troubleshooting Installation Faults
4-9