Table of Contents
Advertisement
Factory Reset
When selected, the camera will perform a complete factory reset of all settings, including network, PTZ
settings and users list, to their default settings. To exclude any specific settings, check the box next to the
settings to exclude them. Click 'Factory Reset' to apply.
5.10.3 Time
•
Start Time: It is set to the latest camera booting date and time.
•
Current Time: Current date and time. Enter a new date and time, then press the Set Current Time
button to update the date & time.
•
Time Format: Change the time format. The selectable time formats are as follows;
YYYY/MM/DD hh:mm:ss (Eg. 2012/10.30 12:30:45.)
DD/MM/YYYY hh:mm:ss (Eg. 10/30/2012 12:30:45.)
MM/DD/YYYY hh:mm:ss (Eg. 30/10/2012 12:30:45.)
•
Time Zone: Select the time zone where the camera is installed. Depending on the time zone, Daylight
Saving Time will work automatically.
•
Automatically synchronized with NTP server: Synchronize the camera time with an NTP server using
NTP (network time protocol). The name of the NTP server should be registered on the NTP server
Name.
DWC-XPZA High-Speed PTZ IP Camera User Manual
67
Advertisement
Table of Contents
