Digital Watchdog MEGApix PTZ DWC-XPZA03Mi User Manual page 41

Local
•
Sensor1~4: Configure the actions when the Sensor is activated. Multiple actions can be set for a single
event.
•
On Video Loss: Configure the actions when the video input signal is lost. Multiple actions can be set for
a single event.
•
On Disconnect: Configure the actions when the link (connection) with the peer system is disconnected.
Multiple actions can be set for a single event. This event happens when the last client, receiving video
from the camera, loses the connection.
•
On Motion: Configure the actions when motion is detected. Multiple actions can be set for a single
event.
•
Audio Detection: Configure the actions when Audio is detected. Multiple actions can be set for a single
event.
•
Shock Detection: Configure the actions when the camera detects strong shock vibrations. Multiple
actions can be set for a single event.
AI Event
•
Event 1~8: Configure the actions when an event triggered by the AI settings occurs. Multiple actions can
be set for a single event.
User Defined Event
•
If specific user events were set up in the "User Defined Event" menu, configure the actions when an
event is triggered. Multiple actions can be set for a single event.
DWC-XPZA High-Speed PTZ IP Camera User Manual
35