5.8.4 Swing
Using the swing function, you can repeatedly make the camera move between 2 preset positions. When the
swing function runs, the camera moves from the preset assigned as the 1st point to the preset assigned as the
2nd point in the CW(Clockwise) direction. Then, the camera moves from the preset assigned as the 2nd point
to the preset assigned as the 1st point in the CCW (Counterclockwise) direction.
In case the preset assigned as the 1st point is the same as the preset assigned as the 2nd point, the camera
turns on its axis by 360° in CW(Clockwise) direction and then it turns on its axis by 360° in
CCW(Counterclockwise) direction.
1.
Check the Enable box.
2.
Select the Preset for 1st Position and 2nd Position.
3.
Enter the speed (0~255).
4.
Press the Save Swing button to save.
DWC-XPZA High-Speed PTZ IP Camera User Manual
54