Digital Watchdog MEGApix PTZ DWC-XPZA03Mi User Manual page 64

On: in case that tilt angle arrives at the top of tilt orbit, the camera turns 180 degrees at the top

and moves in the opposite direction to keep tracking targets.
Off: more than 90 degrees tilt moving is not available.

•
Display PTZ Action: PTZ control actions such as Preset Goto, Pattern, Swing or Group can be displayed
on the top of the live display as the information is displayed with burn-in OSD. It is inserted into the
encoded stream; all clients can see the information.
•
Digital Zoom Magnification: Display zoom ratio.
•
Power Up Action: Specify if the camera will continue the previous action, such as pattern, swing or
group, after it is rebooted by power.
Group-1: When it will reboot, start to Group-1

Preset-1: When it will reboot, start to Preset-1

Off: Moves to the initial position after rebooting.

•
Auto Focus after Zoom control: the camera zooms in and out of the view, and the focus will adjust
automatically once the zoom stops moving.
•
One Shot AF after PTZ: when the camera's pan, tilt and zoom are done working, the autofocus will work
automatically.
•
Motion Detection and Tampering Disable on PTZ: Disable the motion detection and tampering when
the camera's pan, tilt and zoom are working.
Auto Parking
Auto parking is a function to return to the previous preset position or to resume operation such as Pattern,
Swing or Group when a specified time expires after the user stopped PTZ control. Parking time can be set
from 0 to 3600 seconds, and "0" means the Auto Parking function is turned off.
DWC-XPZA High-Speed PTZ IP Camera User Manual
58