Multicast - Digital Watchdog MEGApix PTZ DWC-XPZA03Mi User Manual

DNS
•
Obtain DNS server address automatically: Get DNS server address automatically when IP mode is
DHCP.
•
Use the following DNS server address: Enter the DNS server IP address, Primary or Secondary DNS
server.
IPv6
•
Ipv6 Address: Enter the designated Ipv6 address.
•
Ipv6 Subnet Prefix Length: Enter the bit number of Ipv6 Subnet
•
Ipv6 Default Gateway: Enter the designated Ipv6 gateway.
•
Ipv6 Link Local: Display Ipv6 Link Local.
Port
•
Base Port (1025~65535): Enter the Base Port number. The network base port is used for communication
with remote clients. The port number must be identically configured on the camera and client sides to
connect the camera and remote systems.
•
HTTP Port (80, 1025~65535): Enter the HTTP port used for the web-based connection.
•
HTTPS Port (443, 1025~65535): Enter the HTTPS port for the secured HTTP connection.
•
RTSP Port (554, 1025~65535): Enter RTSP port used for RTSP-based connection. The default TRSP port
is 554. RTSP (Real Time Streaming Protocol) is a standard for media streaming between server and
client.

5.4.2 Multicast

The Multicast menu configures the multicast IP address to which the media stream is delivered when a client
such as a Decoder, VMS or NVR software is connected in multicast mode. The multicast IP address selection
range is between 224.0.0.0 and 239.255.255.255. The selection can be used when the media protocol is set to
Multicast.
DWC-XPZA High-Speed PTZ IP Camera User Manual
22