Digital Watchdog MEGApix PTZ DWC-XPZA03Mi User Manual page 31

•
RTMP is an Internet protocol for transmitting real-time multimedia data, such as Audio and video, to a
select group of connected clients. Normally, RTSP uses RTP to format packets of multimedia content.
The RTP menu is used when the RTP only streaming without an RTSP connection. RTP stream will be
transmitted to the destination set. The SDP (Session Description Protocol) file can be found on the
server, and a client can retrieve it using an HTTP connection.
Related settings:

Destination IP: Set the IP Address of the destination system that will receive RTP Stream. If the

system is a decoder, RTSP authentication information can be in the middle of the RTSP URL as
follows: rtsp://admin:admin
Destination Port: Set the port of the destination system that will receive the TRP stream.

User Name: Enter the user name used as the session name in the SDP file.

File Name: Enter the file name that will be used as the name of the SDP file. Then, it can be

accessed through http://ServerAddress/filename.
•
MPEG-TS is a standard format for transmitting and storing Audio, video, and data [7] and is used in
broadcast systems such as DVB and ATSC. Transport Stream is specified in MPEG-2 Part 1, Systems
(formally known as ISO/IEC standard 13818-1 or ITU-T Rec. H.222.0). Transport stream specifies a
container format encapsulating packetized elementary streams, with error correction and stream
synchronization features for maintaining transmission integrity when the signal is degraded. As MPEG-
TS supports only AAC as the audio algorithm, only video is streamed when the audio algorithm is set to
G.711.
DWC-XPZA High-Speed PTZ IP Camera User Manual
@192.168.10.100:554/video1
25