Table of Contents
Advertisement
Compatible microSD cards
Refer to Parrot's
online documentation
Direct media retrieval (drone to computer)
Alternatively, retrieve the media directly from ANAFI USA, without extracting the microSD card.
Use an enclosed USB-A to USB-C cable to connect the drone (USB-C) to a USB-A port on your computer.
Press
Power to power on ANAFI USA.
ANAFI USA mounts as an external drive. Copy your media from the DCIM/100MEDIA directory to your
computer's hard drive.
When you finish managing your media, click Safely Remove Hardware in the Windows taskbar, then
click Eject ANAFI USA, like any other external drive.
NOTE: When plugged in to a computer and powered on, ANAFI USA's battery discharges itself. You
must recharge your smart battery after you retrieve your media, even if the battery was fully charged
when you began the procedure.
FreeFlight 6 USA Gallery
You can access the Gallery from the FreeFlight 6 USA homescreen. Tap either the
on the top bar of the interface, or the
The Gallery has 2 tabs at the top of the interface; SD CARD, and LOCAL.
NOTE: If ANAFI USA is powered on and connected to the device (directly or through the
Skycontroller), the FreeFlight 6 USA Gallery displays the microSD card media, by default.
Tap any media to preview it.
Tap any green media download box to transfer the corresponding media to your device.
Tap the LOCAL tab to access any media you download to your device.
The Gallery also lets you:
-
preview videos and photos, without downloading them to your device;
-
create panoramas (refer to the
-
erase all media
-
format a microSD card;
-
encrypt a microSD card.
© 2024 Parrot Drones SAS. All Rights Reserved.
for an updated list of compatible microSD cards.
Gallery tile, at the center of the interface.
"Creating
panoramas" section for more information);
A N A F I U S A
microSD card icon
41
Advertisement
Table of Contents
