Camera; Network - Parrot ANAFI USA GOV User Manual

Camera

Camera preferences allow you to select camera options, both in photo and video modes.
Camera PREFERENCES
Camera calibration
CALIBRATE
Auto record from take-off
Lossless zoom only
Display overexposure
Anti-flickering
Correct horizon and cameras alignment
Only resort to the Correct horizon and the Cameras alignment procedures if you notice your videos
and photos are systematically tilted on the same side or if your visible and thermal cameras are
misaligned. Refer to the
Display overexposure
When this setting is activated, the HUD of FreeFlight 6 USA shows all overexposed areas of the screen
as hatched, which enables you to fine-tune your framing, your EV settings, or both.
Anti-flickering
This setting and the associated technology aim to eliminate the flicker effect which can arise due to
some artificial lights. The AUTO option should work for most users, but depending on your country,
you can try other settings if you feel bothered by a flicker effect on the screen, your artificial light
videos, or both.
Tap RESET ALL CAMERA PREFERENCES AND SETTINGS to reset
values.

Network

Network preferences let you change your ANAFI USA's connectivity options, Wi-Fi network name,
password, and band.
Network PREFERENCES
Broadcast DRI
Network name
Wi-Fi band
Tap PASSWORD to define the Wi-Fi key shared by ANAFI USA and the Skycontroller USA. Parrot defines
a unique random password for each ANAFI USA and Skycontroller USA package, but Parrot highly
recommends you define your own password.
The security of your ecosystem and data depends on the security of this password. Your password be
at least 10 characters long, and must use at least 3 types of characters among:
•
Uppercase characters,
•
Lowercase characters,
•
digits,
•
special characters.
52
– Tap
"Camera Calibration" section of this guide for the detailed procedures.
Correct horizon, Gimbal
Cameras alignment
NO / YES (video only)
NO / YES
NO / YES
AUTO / 50Hz / 60Hz / OFF
Camera preferences to the default
OFF / ON
Tap the field to change your ANAFI USA's
network name.
Tap PASSWORD to enter the password.
AUTO / MANUAL
calibration and