Microsd Card And Media Management; Installing A Microsd Card; Retrieving Photos And Videos; Compatible Microsd Cards - Parrot ANAFI User Manual

MicroSD card and media management

This section explains how to install a microSD card inside ANAFI USA and how to retrieve your media
from the microSD card.

Installing a microSD card

To install a microSD card into its slot, you must remove the battery from the drone. Refer to the
"Battery removal" section of this guide for more information.
When you remove the battery from the body of the drone, you uncover the microSD slot, which is
protected by a small metal lock.
Slide the metal lock with a finger toward the back of ANAFI USA to open it, you will feel a slight click.
Lift the front part of the lock to open the slot. Position the microSD card into its keyed slot. Ensure that
the metal contacts of the card are facing down and set on the contacts of the drone. The shortest side
of the microSD card must face toward the back of the drone.
Tilt the metal lock over the microSD card. Press a finger gently on the lock and slide it toward the front
of ANAFI USA to close and lock it, you will feel a slight click. A closed lock icon and an arrow, located
on the right of the microSD slot, confirm the way you must slide the lock to close it.

Retrieving photos and videos

Use a microSD to SD card adapter to transfer videos and photos you have taken with ANAFI USA to
your computer. Slide the microSD card into the adapter and use the adapter how you would use any
other SD card. Access your videos and photos through a card reader or the SD card slot of your
computer. Copy your videos and photos to the hard drive of your computer to edit, store, and manage
your media.
Tip: Parrot recommends you backup your photos and videos, and you empty your microSD card after
each flight, to ensure you always have available memory space to capture new still or moving images.

Compatible microSD cards

Refer to Parrot online documentation for an updated list of compatible microSD cards.

Direct media retrieval (drone to computer)

You can also retrieve your media directly from ANAFI USA, without extracting the microSD card.
Use an enclosed USB-A to USB-C cable to connect the drone (USB-C) to a USB-A port of your computer.
Press Power to power on ANAFI USA.
ANAFI USA mounts as an external drive. Copy your media from the DCIM/100MEDIA directory to
your computer's hard drive.
When you finish managing your media, eject ANAFI USA as any other external drive.
Note: When plugged in to a computer and powered on, ANAFI USA's battery discharges itself. You
must recharge your smart battery after you retrieve your media, even if the battery was fully charged
when you began the procedure.

FreeFlight 6 USA Gallery

Finally, you can manage your media and download them directly from ANAFI USA to your device
with the Gallery of FreeFlight 6 USA.
© 2023 Parrot Drones SAS. All Rights Reserved.
A N A F I U S A
41