Table of Contents
Advertisement
Media retrieval
Installing and retrieving the microSD card
The microSD card slot of ANAFI Ai is located on the left side of the drone, under the SD cover. To
install the microSD card, lift the cover open and insert the microSD card straight into the slot,
shortest side first and connectors turned to the back of the drone. To remove the microSD card,
press the card and extract it.
Retrieving photos and videos
Use a microSD to SD card adapter to transfer videos and photos you have taken with ANAFI Ai to
your computer. Slide the microSD card into the adapter and use the adapter how you would use any
other SD card. Access your videos and photos through a card reader or the SD card slot of your
computer. Copy your videos and photos to the hard drive of your computer to edit, store, and
manage your media.
Compatible microSD cards
The following microSD cards are fully compatible with ANAFI Ai:
•
Lexar 1800X
•
SanDisk Extreme
•
SanDisk Extreme Plus
•
SanDisk Extreme Pro
•
ProGrade V60
Direct media retrieval (drone to PC)
You can also retrieve your media directly from ANAFI Ai, without extracting the microSD card.
Power the full system on and activate the Direct connection from PC or smartphone option from the
Developer settings. Refer to the
Use the enclosed USB-C to USB-C cable to connect the drone to the USB-C port of your PC (Windows
OS computer).
If your computer does not have a USB-C port, you can use a USB-A to USB-C cable to connect ANAFI
Ai to your computer.
Copy your media from the DCIM/100MEDIA directory to your computer's hard drive. When you
finish managing your media, eject ANAFI Ai as any other external drive.
Note: When plugged in to a computer and powered on, ANAFI Ai's battery discharges itself. You must
recharge your smart battery after you retrieve your media, even if the battery was fully charged when
you began the procedure.
44
64GB
64GB, 128GB
128GB
128GB
64GB
"Settings / Advanced /
Developer" section for more information.
Advertisement
Table of Contents
