Getting Started - Parrot ANAFI USA GOV User Manual

Getting started

1. Charge the batteries using the enclosed USB-A to USB-C cable and charger. Refer to the
"Battery charging" section of this guide for more information.
Parrot recommends you always fully charge all batteries before flying ANAFI USA.
2. Ensure that your flying zone is safe and clear.
3. Unfold the arms.
4. To start the drone, place it on a flat horizontal surface and press
5. Power on the Skycontroller USA by pressing the
6. Launch FreeFlight 6 USA, which connects ANAFI USA to Skycontroller USA.
7. Systematically check for FreeFlight 6 USA, Skycontroller USA, and ANAFI USA software updates
to ensure maximum performance and safety.
IMPORTANT: Parrot strongly recommends that you regularly refer to the
available on the Parrot website, to ensure that you have the latest versions of the drone and controller
firmware, and FreeFlight 6 USA App. If you are an offline user, you must contact your local Parrot
Partner or Parrot Contact to obtain the .apk file to perform an offline system update. Refer to the
"FreeFlight 6 USA offline update via APK
8. Calibrate your ANAFI USA, your Skycontroller USA, or both, if required. Follow the instructions
on the screen.
9. Ensure that your flying zone is still safe and clear, and that no person or animal has approached
or is approaching ANAFI USA.
10. Stay at least 2 m (6 ft) from the drone, press
© 2024 Parrot Drones SAS. All Rights Reserved.
Power button.
file" chapter for more information.
Take-off/Land to start the flight operation.
A N A F I U S A
Power.
Release Notes ANAFI USA
23