Microsd Card And Media Management; Installing A Microsd Card; Retrieving Photos And Videos; Compatible Microsd Cards - Parrot ANAFI USA GOV User Manual

MicroSD card and media management

This section explains how to install a microSD card inside ANAFI USA and how to retrieve
your media from the microSD card.

Installing a microSD card

To install a microSD card into its slot, you must remove the battery from the drone. Refer to
the "Battery removal" section of this guide for more information.
When you remove the battery from the body of the drone, you uncover the microSD slot,
which is protected by a small metal lock.
Slide the metal lock with a finger toward the back of ANAFI USA to open it, you will feel a
slight click. Lift the front part of the lock to open the slot. Position the microSD card into its
keyed slot. Ensure that the metal contacts of the card are facing down and set on the
contacts of the drone. The shortest side of the microSD card must face toward the back of
the drone.
Tilt the metal lock over the microSD card. Press a finger gently on the lock and slide it toward
the front of ANAFI USA to close and lock it, you will feel a slight click. A closed lock icon and
an arrow, located on the right of the microSD slot, confirm the way you must slide the lock
to close it.

Retrieving photos and videos

Use a microSD to SD card adapter to transfer videos and photos you have taken with
ANAFI USA to your computer. Slide the microSD card into the adapter and use the adapter
how you would use any other SD card. Access your videos and photos through a card reader
or the SD card slot of your computer. Copy your videos and photos to the hard drive of your
computer to edit, store, and manage your media.
Tip: Parrot recommends you backup your photos and videos, and you empty your microSD
card after each flight, to ensure you always have available memory space to capture new still
or moving images.

Compatible microSD cards

Refer to Parrot online documentation for an updated list of compatible microSD cards.

Direct media retrieval (drone to computer)

You can also retrieve your media directly from ANAFI USA, without extracting the microSD
card.
Use an enclosed USB-A to USB-C cable to connect the drone (USB-C) to a USB-A port of your
computer. Power ANAFI USA on.
ANAFI USA mounts as an external drive. Copy your media from the DCIM/100MEDIA
directory to your computer's hard drive.
When you finish managing your media, eject ANAFI USA from your computer.
43