Advertisement
Available languages
Available languages
Fills with the Wrong Temperature Water
• Turn both faucets on fully,
• Make sure temperature
selection is correct,
• If Auto Temperature
Control
is selected,
cold water may feel warmer
than cold water from the tap tsee page 3),
• Make sure hoses are connected
to correct faucets and inlet connections,
Be sure water supply is regulated
correctly.
Flush water line before filling washer,
• Check the water heater, It should be set to deliver a mminmm
120 ° F (49 ° C) hot water at the tap, Also check water
heater capacity and recovery
rate,
• Discolmect
hoses and clean screens, Hose filter screens may be plugged.
• To obtain the energy savings,
warm water fills are lukewarm,
• To save energy, this washer
will regulate
wash water temperatures
by mixing hot and cold water to reach the prop-
er water temperature,
10
Advertisement
