Download
Share
Print this page
Maytag Atlantis MAV6451AWW Install Manual
  1. Manuals
  2. Brands
  3. Maytag Manuals
  4. Washer
  5. MAV6451AWW
  6. Install manual

Maytag Atlantis MAV6451AWW Install Manual

Maytag atlantis mav6451aww: install guide
Hide thumbs Also See for Atlantis MAV6451AWW:
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual See also: User Manual, Instruction and Installation Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the Atlantis MAV6451AWW and is the answer not in the manual?

Questions and answers

Related Manuals for Maytag Atlantis MAV6451AWW

Summary of Contents for Maytag Atlantis MAV6451AWW

  • Page 2 NOTE: If the standpipe height is less than 3 feet or greater than 5 feet, refer to the “DRAIN FACILITY” section to determine if special provisions are needed. HOT AND COLD WATER FAUCETS must be within 4 feet of the back of the washer. NOTE: For installations requiring longer hose length, it is recommended to purchase a double male 3/4”...
  • Page 3 (Part No. 12001875) containing accessory ground wire, clamp, ground screw and washer can be purchased. Contact your authorized Maytag dealer for further assistance. Follow ALL grounding requirements and codes. A proper external ground MUST be determined prior to wire hookup. Consult local building officials and a qualified electrician if in doubt.

  • Page 4: Cabinet Dimensions

    (Part No. 12001585). If a high- volume pump is purchased, the extension kit is included. Contact your authorized Maytag dealer for further assistance. FLOORING For best performance, the washer must be installed on a solidly constructed floor.
  • Page 5 NOTE: Retain the corner posts for later use. • Untape and raise the washer lid. R e m ove the s t y r o foam tub bl o ck, remove the items shipped in the spin basket, then replace the tub bl o ck .
  • Page 6 With hands on opposite corners, rock the washer to check for stability. With a level, check the washer and make the n e c e s s a ry adjustments to the front leveling legs. N OT E :Self-stabilizing rear legs level the rear of the machine side-to-side.
  • Page 7 ■ Drain hose is properly located into drain facility and is not twisted or kinked. ■ Washer has been leveled with legs firmly on the floor. The front leveling legs’ locking nuts have been tightened. ■ Fill washer, checking for the correct water temperature.