Typical Configurations - Paradyne HOTWIRE 7924 User Manual

About HotWire Model 7924 Termination Units

Typical Configurations

HotWire Model 7924 standalone units can be used in campus applications where
long loop distances normally require the campus to contract with the local
telephone exchange carrier to deliver private line services across the campus.
Figure 1-1 shows two typical campus applications where remote PBXs or
multiplexers are interconnected across a campus using two HotWire Model 7924
standalone units. In each pair, one unit is configured as a central site unit or
central office (CO) and the other is the customer premises (remote) unit (CP).
Each HotWire Model 7924 standalone unit is configured at the factory to operate
at the CP side of an T1 HDSL connection. However, you can easily reconfigure a
unit for use at the CO end, as would be necessary for the configurations in
Figure 1-1. (Conversely, HotWire Model 7924 nest cards are preconfigured for
CO operation.)
Figure 1-1. Campus Network Applications
1-3
7924-A2-GB20-20 August 1997