Paradyne HOTWIRE 7924 User Manual page 33

7924-A2-GB20-20
Command 2
Time Since Board Power–Up or Reset: 0000d 00h 00m 00s
1 – 1 minute stats.
2 – 15 minute stats.
3 – 1 hour stats.
4 – 12 hour stats.
5 – 24 hour stats.
6 – Running total.
7 – Clear Statistics.
Q – Quit
stats
Select a time frame from the above list to display statistics for a specified time
period.
stats 1
Current 1 minute:
HDSL Errors:
FAW LoopA – 0
FAW LoopB – 0
CRC LoopA – 0
CRC LoopB – 0
FEBE LoopA – 0
FEBE LoopB – 0
Previous 1 minute:
FAW LoopA – 0
FAW LoopB – 0
CRC LoopA – 0
CRC LoopB – 0
FEBE LoopA – 0
FEBE LoopB – 0
stats
Performance Statistics for DSX-1-Compatible Unit
The type of statistics displayed under the T1 Errors column depends on which
type of framing is selected. When the unit is configured for D4 framing, FAS
(frame alignment signal) errors are reported. When the unit is configured for ESF
framing, CRC errors are reported.
Refer to the Glossary for definitions of the types of errors reported.
August 1997
T1 Errors:
BPV – 0
CRC – 0
MOS – 0
BPV – 0
CRC – 0
MOS – 0
Monitoring the Unit
6-3