Paradyne HOTWIRE 7924 User Manual page 52

V.35-Compatible Units
Use
board.
The jumper and switchpacks detailed in
configuration options. All other jumpers (listed below) should always be left as
positioned at the factory.
7924-A2-GB20-20
Figure C-2 to assist you in locating the switchpacks and jumpers on the
Jumper Pins (Factory-Setting)
P1 1–2
P2 1–2
P4 2–3
P5 No Jumper
P8 1–2
P9 2–3
P10 2–3
P11 1–2
August 1997
Switchpacks and Jumpers
Figure C-2 are used to change
C-3