5: Manually Calibrating Displays; Manually Calibrating Displays Using Qaweb Enterprise; Access To The Desktop Via Securview Application; Access To The Desktop Via Windows Login - Hologic SecurView DX Quality Control Manual

Chapter 5 Manually Calibrating Displays
5:
5.1

Manually Calibrating Displays using QAWeb Enterprise

This section requires a user to access the Windows desktop. This may be accomplished in
one of two ways: (1) via the SecurView Application login prompt, or (2) via the Windows
login prompt.
5.1.1 Access the Desktop via SecurView Application
1.
2.
Note
If not customized, the default SecurView administrator credentials are:
Username: admin
Password: admin
3. Select the Exit to Windows tab. Wait until the application has fully closed.
4. Skip to the section
5.1.2 Access the Desktop via Windows Login
1.
2.
Note
If not customized, the default customer Windows credentials are:
Username: customer
Password: Simply-The-Best
3.
MAN-09466 Revision 001
SecurView DX Workstation V12.0 Quality Control Manual
Log out of the SecurView DX application.
Log into SecurView as an Administrator user.
Launch the Local QAWeb Application
At the task bar, select Start, select the User icon, then select Sign Off.
Log into Windows as the customer administrator.
Continue to the next section.
Chapter 5: Manually Calibrating Displays
on page 32.
Page 31