Snom M56 Quick Installation Manual page 10

FCC Part 68
Consumer Information:
a. This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the back or bottom of this
equipment is a label that contains, among other information, a product
identifier in the format US:AAAEQ##TXXXX. If requested, this number
must be provided to the telephone company.
b. An applicable certification jacks Universal Service Order Codes (USOC)
for the equipment is provided (i.e., RJ45C) in the packaging with each
piece of approved terminal equipment.
c. A plug and jack used to connect this equipment to the premises wiring
and telephone network must comply with the applicable FCC Part 68
rules and requirements adopted by the ACTA. A compliant LAN cable
(RJ45) and modular plug is provided with this product. An RJ45 jack
should normally be used for connecting to the SIP equipment through
the LAN cable. See installation instructions for details.
d. If this equipment causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance
of service may be required. But if advance notice isn't practical, the
telephone company will notify the customer as soon as possible. Also,
you will be advised of your right to file a complaint with the FCC if you
believe it is necessary.
e. The telephone company may make changes in its facilities, equipment,
operations or procedures that could affect the operation of the
equipment. If this happens the telephone company will provide
advance notice in order for you to make necessary modifications to
maintain uninterrupted service.
f. Should you experience trouble with this equipment, please contact
Snom Technology GmbH
1 (339) 227-6160 (select option 2)
for repair or warranty information. If the equipment is causing harm to
the telephone network, the telephone company may request that you
disconnect the equipment until the problem is resolved.
10