Table of Contents
Advertisement
EN Dometic FreshJet 7 Series Lite 48 V
7.4
Air conditioning modes
Air conditioning mode
Automatic
Cooling
Heating
Ventilation
Dehumidifying
Air purifier
7.5
Additional functions
Additional func-
tion
Timer
Sleep
I Feel
8 Before initial use
Inspection before starting up
Before switching on the roof air conditioner, observe the following:
1.
Check whether the supply voltage corresponds to the values specified in
10
Description
Displayed
symbol
You specify the temperature, and the roof air conditioner brings the interior to this
temperature by heating or cooling and by controlling the necessary fan speed.
You specify the temperature and fan settings, and the roof air conditioner cools the
interior to this temperature.
You specify the temperature and fan settings, and the roof air conditioner heats the
interior to this temperature. The fan will only start after 2 min (on Low speed) and
then after around 5 min will go to the set fan speed (after the evaporator reaches
temperature).
You specify the fan settings, and the roof air conditioner circulates air without heat-
ing or cooling.
The roof air conditioner removes moisture from the air without heating or cooling
the interior thus decreasing the relative air humidity.
The roof air conditioner ionizes the air, thus collecting dust and particles including to
viruses and bacteria out of the air.
Display message
Description
The roof air conditioner is switched on at the specified time.
The roof air conditioner is switched off at the specified time.
The roof air conditioner is switched on and off at the specified times.
The sleep function reduces the fan speed and the compressor speed to
reduce the noise levels for comfortable sleeping.
The remote control measures the room temperature and transmits this
measurement to the roof air conditioner every 10 min. The roof air condi-
tioner adapts the target value to this measurement.
Technical data
on page 23.
Advertisement
Table of Contents
