Before Initial Use - Dometic FRESHWELL FW 3000 Operating Manual

FreshWell3000
7

Before initial use

Inspection before starting up
Before you switch on the under-bench air conditioner, observe the following:
➤ Check whether the supply voltage and frequency correspond to the values
specified in the technical data, see page 29.
➤ Ensure both the air intake opening and the air nozzles are free. All ventilation
grilles must always be kept free to ensure that the under-bench air conditioner is
able to operate at maximum capacity.
!
CAUTION! Beware of injury
Do not insert your fingers or objects into the air nozzles or the intake
grille.
Setting the time
➤ Set the current time: see chapter "Setting the time" on page 24.
Set the remote control
➤ Insert the batteries (see chapter "Replacing the remote control batteries" on
page 23).
✔ The display shows all symbols for 5 seconds.
➤ Press simultaneously the
✔ The display shows the default model number.
➤ Press simultaneously + and – button within 3 seconds to select the model
number:
– FreshWell3000: 02
– FreshJet: 07
– FreshLight: 11
✔ The display shows all symbols for 5 seconds.
✔ The remote control is ready for operation.
EN
button and the button during this 5 seconds.
Before initial use
17