Dometic FreshJet 7 Lite 48 V Series Operating Manual page 12

EN Dometic FreshJet 7 Series Lite 48 V
• In the standby mode, the remote control display is inactive too. You can switch the remote control on to stand-
by independently from the roof air conditioner.
To switch only the remote control to or from standby, press the
panel's IR receiver.
9.4 Switching the roof air conditioner on and to standby
NOTE When the roof air conditioner is switched on, it operates with the values that were set before
switching to standby. The roof air conditioner can be switched off only by cutting the power supply.
Press the button on the remote control or the
er on or to standby.
9.5 Selecting the air conditioning mode
Select the desired air conditioning mode using the MODE button
The roof air conditioner confirms the receipt of the values with a beep sound. The roof air conditioner is switched
to the selected air conditioning mode.
9.6 Selecting the fan speed manually
In all modes, except for the Automatic ( ) and Dehumidifying ( ) modes, the fan speed can be selected manually.
Display message
Press the button of the remote control or the
The roof air conditioner confirms the receipt of the values with a beep sound.
The new fan speed is set.
12
Description
Low fan level
Medium fan level
High fan level.
Turbo fan level.
Automatic mode (the fan speed is adjusted based on the ambient temperature).
button while not pointing to the control
button on the control panel to switch the roof air condition-
(Air conditioning modes
button of the control panel to select the desired fan speed.
on page 10).