Dometic FreshJet 7 Lite 48 V Series Operating Manual page 13

9.7 Setting the temperature
In the Automatic ( ), Cooling ( ), Heating ( ), and Dehumidifying ( ) modes, you can specify a temperature
between 16 °C and 31 °C.
Use the + or – button on the remote control to set the desired temperature.
The roof air conditioner confirms the receipt of the values with a high note. The temperature is set on the roof air
conditioner.
9.8 Setting the current time
The remote control needs the current time in order to program the timer. The time is shown on the remote control
display.
1. Press and hold the
The time flashes on the remote control display.
2. Use the + or – button to set the current time. Press and hold the + or – button longer than 2 s to increase or de-
crease the time quicker.
3. Press the SET button to confirm the time.
9.9 Setting the timer
The timer function allows you to set a specific time period for air conditioning. You can specify the switch-on time,
the switch-to-standby time, or both values.
The timer function is set via remote control.
NOTE The remote control returns to its initial mode if no button is pressed on the remote control for 15 s
while programming the timer.
Set the switch-on timer as follows:
a) Select the desired air conditioning mode and all required values (for example the temperature).
b) If necessary, switch the roof air conditioner to standby.
The switch-on timer can only be set when the roof air conditioner is in standby.
c) Press the button one time.
The symbol flashes on the remote control display.
d) Use the + or – button to set the time when the roof air conditioner shall be switched on.
e) Press the button.
The switch-on timer is set. The roof air conditioner will be switched on with the selected air conditioning
mode at the specified time.
Set the switch-to-standby timer as follows:
a) If necessary, switch the roof air conditioner on.
The switch-to-standby timer can only be set when the roof air conditioner is switched on.
b) Press the button twice.
The symbol flashes on the remote control display.
c) Use the + or – button to set the time when the roof air conditioner shall be switched to standby.
d) Press the button.
button in order to get into the mode for setting the time.
Dometic FreshJet 7 Series Lite 48 V EN
13