Siemens SIMATIC HMI KP Series Operating Instructions Manual page 22

Safety instructions and approvals
2.2 Approvals
FM approval
"Factory Mutual Research" approval in accordance with Approval Standard Class
Number 3611, 3600, 3810
Approved for use in:
● Class I, Division 2, Group A, B, C, D Tx
● Class I, Zone 2, Group IIC Tx
UL approval
"Underwriters Laboratories Inc." approval in accordance with:
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142, (Process Control Equipment)
or
"Underwriters Laboratories Inc." approval in accordance with:
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142, (Process Control Equipment)
● UL 1604 (Hazardous Location)
● CSA-213 (Hazardous Location)
Approved for use in:
● Class I, Division 2, Group A, B, C, D or
● Class I, Zone 2, Group IIC or
● Non-hazardous locations
Approval for Australia
The HMI device fulfills the requirements of standard AS/NZS 2064 (Class A).
N117
22
Operating Instructions, 10/2010, A5E03284305-01
KP8, KP8F