Table of Contents
Advertisement
In the following image, the module to be configured is labeled in red.
Procedure
1. Double-click in the station window on the marked device.
The following dialog appears.
2. Select the "Shared" tab.
The buttons are gray as long as no device is selected.
3. In the "Devices which can be coupled" group, select the device to be coupled to the
KP8F.
4. Click "Couple".
The Shared Device connection is established. The coupled device is displayed in the
"Coupled devices" group. See red marking.
5. If you want to decouple a Shared Device connection, select the device in question.
6. Click "Uncouple".
The Shared Device connection is terminated. The decoupled device is displayed in the
"Devices which can be coupled" group.
KP8, KP8F
Operating Instructions, 10/2010, A5E03284305-01
Setting the KP8 and KP8F
6.7 KP8F – Configure Shared Device
69
Advertisement
Table of Contents
