Siemens SIMATIC HMI KP Series Operating Instructions Manual page 70

Setting the KP8 and KP8F
6.7 KP8F – Configure Shared Device
7. If there are several Shared Device connections, you must select a device for full access.
The following dialog appears:
8. Select the required device for the access type "Full".
9. Click "OK".
The entry is saved. The dialog box closes.
10. Select the "Access" tab.
The following dialog appears:
11. Select the Shared Device connection for which you want to change the access.
Parameter
Full
. . .
12. Select the required parameter.
13. Click "OK".
The entry is saved. The dialog box closes.
Result
Shared Device is configured for the KP8F.
70
Meaning
Read and write access by the controller
No access by the controller
Operating Instructions, 10/2010, A5E03284305-01
KP8, KP8F