General Notes - Heidolph Lab jack e-Lift Assembly Instructions Manual

Operation

General notes

By means of the optional lab jack e-Lift, magnetic stirrers, type
Hei-PLATE Mix'n'Heat Ultimate of Heidolph Instruments placed on the platform, can be
manually lifted and lowered as well as automatically lowered in laboratory operations. The
lab jack can be moved not only via the integrated handwheel but also via the control elements
and the software of the connected magnetic stirrer, see the associated operating instructions
Hei-PLATE Mix'n'Heat Expert/Ultimate (01-005-006-69).
CAUTION
The USB-C interface of the magnetic stirrer may only be used for opera-
tion with a Heidolph Instruments' lab jack. The general USB-C standard
is not supported. Direct or indirect damage caused by connecting devices
not authorized by the manufacturer to the device's USB-C interface is the
responsibility of the user.
WARNING
The lab jack is designed for a load of maximum 10 kg. Direct or indirect
damages caused by an overload of the lab jack, are generally the sole
responsibility of the user.
Always be sure to position all setups and accessory parts centrally above
the magnetic stirrer on the lab jack.
Move the lab jack downward and/or pull the setups centrally upward
as much as possible to remove glass flasks or attachments from the
magnetic stirrer!
Never pivot setups to the outside (see example: setup with magnetic
stirrer, heating attachment and Findenser ).
®
18