Siemens Sensformer IPS-601-20WGI User Manual page 32

Connectivity device v3 indoor
Table of Contents

Advertisement

Manual for installation of the Sensformer® Connectivity Device
The parameters in the system information table are not displayed
entirely in case there is no internet connection. In case mobile
connection was established, the mobile communication data are
shown in the system information, and the actual signal strength
and data traffic are shown on the graphs.
6.2.2.3. Sensors
The Sensors menu contains the historical data for the input
channels. The analog and PT100 data is shown in one graph, while
the digital data in two other graphs below.
Figure 35 - Sensors page of web GUI
The slider above the graphs and the menu bar allows zoom to a
given date-time interval for the charts.
Figure 36 - Slider to zoom to a time period
Buttons:
Download all: Download all sensor data in .csv files.
Selected: Download the selected analog data, and the two
digital data at the selected interval in .csv files.
Analog 1, 2, 3, and PT100: Selects which sensor data to
appear.
Slider:
24 scales
Dynamically divides all data
It shows 1 hour time slides for normal operation
Charts:
Displays the selected data in different colors,
The exact measured data is displayed at each point if the
mouse is pointing to it.
6.2.2.4. Map
In case there is internet connection, the device will appear on the
google map. Otherwise, the last measured GPS data will be
shown on the screen in text format.
Figure 37 - Map page of web GUI with internet connection
Figure 38 - Map page of web GUI without internet connection
If there is not coordinate, the device shows on this page: "No
available location data".
6.2.2.5. ModBus
The Modbus sensors can be set on this page.
Figure 39 - ModBus page
The parameters of each sensor can be independently set. The
parameter list is:
ID: the Modbus ID, the device set it.
Name: the name of the register,
Slave address: address of the Modbus sensor,
Register address: address of the register,
Register count: how many bytes long the register is: 1 or 2.
© 2020 Siemens Energy
Page 31

Advertisement

Table of Contents
loading

Table of Contents