Advertisement
Please follow the steps below to install the card into the socket.
Step 1:
Please follow the steps below to install the card into the socket.
Insert the card into the socket at an angle while making sure the notch and key are perfectly
aligned.
M.2 Module
Step 2:
Press the end of the card far from the socket down until against the stand-off.
Step 3:
Screw tight the card onto the stand-off with a screw driver and a stand-off screw until the gap
between the card and the stand-off closes up. The card should be lying parallel to the board
when it's correctly mounted.
Quick Installation Guide | KS101-EHL
M.2 Module
Stand-off
Notch
M.2 Module
Notch
Stand-off
Notch
M.2 Socket
Stand-off
Key
M.2 Socket
M.2 Socket
Key
Key
4
Advertisement
