Memory Function - inventum BDA435 Instruction Manual

Note: please use the original cuff that has passed the clinical trial!
Any replacement of original component with the component not
provided by the manufacturer might result in measurement error.
Self check for the cuff strap
The icon is always displayed on the screen when the cuff is worn
correctly. When the cuff is worn too loosely, the
to remind you. If the
button to stop the measurement.
Keep still indication
The icon flashes when the body moves during the measurement,
which may cause incorrect measurement results. If so, take another
measurement.
6

memory function

This blood pressure monitor stores 99 sets of memories of two users.
After each measurement, the monitor will automatically store the
measurement data. When the memory is full, the old measurement
data will be overwritten with the new one.
• In the standby mode, press the button once and the device will
display the average value of the blood pressure measured for the first
three times.
• Press the button again, the first memory will be displayed.
• Press the button again and the rest of the memories will be
displayed one by one.
Delete the memory
Keep pressing the button for three seconds to delete the measure-
ments stored on the device for user 1 or 2, depending on the selected
user. When the memory is empty, the display shows
icon is flashing all the time, please press the
icon will always flash
.
English
37
•