inventum BDA435 Instruction Manual page 33

• Remove the old batteries from the device and follow your local
recycling guidelines.
• Do not dispose of batteries in fire. Batteries may explode or leak.
• Do not use new and used batteries together.
• Do not use different types of batteries together.
FUNCTION SETTING
User mode
In standby mode, press the
interface. Then press the
groups.
Date and time setting
It is important to set the date and the time before using your blood
pressure monitor, so that a time stamp can be assigned to each record
that is stored in the memory (year: 23 —99, time format: 12 H).
In standby mode, press the
date setting, and "year" will flash. Press the button to adjust to the
desired year, and then press the
When the "year" is set, it will automatically enter the month setting.
At this time, the "month" icon will flash. You can switch to the desired
value by pressing the button. Follow the same step to set the date,
hour and minute.
year
button to enter the user group selection
button again to switch and select user
button for about 3 seconds to enter the
button to confirm the selection.
month date hour minute
English
33
•