inventum BDA435 Instruction Manual page 35

Applying the arm cuff
1. Connect the arm cuff to your monitor by inserting the air plug into the
air tube connection securely.
2. Place your hand through the cuff loop. Pull the cuff until it reaches
your upper left arm.
Note: the bottom edge of the arm cuff should be 2 to 3 cm
(0.79-1.18 inches) above the inside elbow. The air tube is on
the inside of your arm and aligned with your middle finger.
• Make sure that the air tube is positioned on the inside of your arm
and wrap the cuff securely, so it can not move around your arm.
Note: repeated measurement will result in blood congestion in the
arm, which will affect the measurement result. How to avoid blood
congestion and ensure the repeated measurement is accurate?
You can raise the left hand and hold the fist several times, or take off the
cuff and rest for at least 2–3 minutes before taking the measurement.
2 to 3 cm
(0.79-1.18 inches)
Bottom edge
35
English •