Installation Instructions.
Special Instructions for Steam Models
Water inlet hose
instructions and local codes.
Tools Needed for All Installations:
1/4"
Nut driver
-
Utility
knife
Tin snips
to 1" (25.mm) or hex-head
socket wrench
Additional Tools Needed (on some models):
1
Putty knife
Parts Supplied (all models):
sá
included.
"with a pedestal or
stack
kit.
Parts Needed (steam models):
Rubber washer
" e
-
E
?
5'
(1.52 m) inlet hose
"Y" connector
2' (0.6 m) inlet hose