E)
Power supply cord 4-wire receptacle
(NEMA Type 14-30 R): Refer to "4-Wire
"Venting Requirements."
Power supply cord 3-wire receptacle
(NEMA Type 10-30 R): Refer to "3-Wire
"Venting Requirements."
Requirements."
' Strain Relief", then "3-Wire Direct Wire
Connection," then, go to "Venting
Requirements."
ground conductor to neutral wire, go to "Optional 3-wire
Connection." This connection may be used with either a
power supply cord or a direct wire connection.
o
Power Supply Cord Strain Relief
1. Attach power supply cord strain relief
»
enough to hold the two clamp sections (C) together.
2. Attach power supply cord t o strain relief
e d i
p n t
—
E
strain relief screws.
12
A
"
En.
—
bond wire (E) from green external ground conductor screw
(A).
a
ue
screw (B). Tighten screw.
— —
A v e
—
F O
—
screw.