Quick Reference; Quick Start Procedure - Paradyne ACCULINK
3150 Quick Reference

ACCULINK 3150 CSU

Quick Reference

Document Number 3150-A2-GL11-80
May 2000
Product Documentation on the World Wide Web
We provide complete product documentation online. This lets you search the
documentation for specific topics and print only what you need, reducing the waste of
surplus printing. It also helps us maintain competitive prices for our products.
Complete documentation for this product is available at www.paradyne.com.
Select Library
Select the following document:
3150-A2-GB24
ACCULINK CSU, Models 3150-A4 and 3151, Operator's Guide
To request a paper copy of a Paradyne document:
Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396)
Outside the U.S.A., call 1-727-530-8623

Quick Start Procedure

Before installing the CSU, see the Important Safety Instructions beginning on
pageNO TAG.
The following procedure is offered for experienced CSU users who are familiar with the
3150 CSU installation process and have no special requirements for their application.
Refer to the ACCULINK CSU Operator's Guide for more information.
1. Attach the power cord to the rear of the CSU and the other end to a grounded
115 Vac power outlet.
2. Attach the DTE cable (DB15) and the 8-pin network cable to the DTE and
NETWORK connectors, respectively, located on the CSU rear panel. Then,
connect the other end of the DTE cable to the CPE. Connect the other end of the
network cable to the RJ48C jack provided by the telephone company. See
Appendix E, Pin Assignments , in the Operator's Guide for more information.
3. Power on the CSU to perform the power-on self-test. See Power-On Self-Test in
Chapter 2, Installation , of the Operator's Guide for more information.
4. If you intend to use front panel emulation, connect the cable from the PC to the
COM port on the rear panel of the CSU.
Technical Manuals T1/E1 Digital Access Devices.
1