Paradyne ACCULINK
3150 Quick Reference page 12

Table 5. Alarm Configuration Options
Option
Alrm Msg: Alrm Msg:
SNMP Trap: SNMP Trap:
TrapDisc: TrapDisc:
DialOut: DialOut:
Call Retry: Call Retry:
Dial Delay:
AltDialDir:
Err Rate: Err Rate:
(Excessive Error Rate)
Factory 1 Factory 2
Disab
Modem
Com
Both
Enab
Disab
Enab
Disab
Enab
Disab
Enab
Disab
1–4
5
6–10
None
1–5
10E–4
10E-5–10E-9 10E-5–10E-9
Comments/Description
Disab Does not display alarm messages.
Sends alarm messages to MODEM
Modem
port.
Com Sends alarm messages to COM port.
Sends alarm messages to both the
Both
COM port and the MODEM port.
Enab
Sends SNMP traps Sends SNMP traps.
Disab
Enab
Specifies whether the modem p
connection will disconnect after a trap connection will disconnect after a trap
Disab
is sent.
Enab
Provides the option to allow automatic
dial out to send alarm messages on dial-out to send alarm messages on
Disab
MODEM port.
Enab
Specifies whether an outgoing call is Specifies whether an outgoing call is
retried on a busy or failed call attempt.
Disab
1–4 The time (in minutes) to delay between
5 successive alarm dial-outs or retry
6–10 attempts.
The alternate dial-out directory to use if
None
a call to the primary number cannot be
1–5
completed.
10E–4 The error rate threshold for Excessive
Error Rate Alarm. Error Rate Alarm
10
p