Paradyne ACCULINK
3150 Quick Reference page 10

Table 4. User Interface Configuration Options (2 of 3)
Option
CStop Bits: CStop Bits:
(Communication Port (Communication Port
Stop Bits) St Bit )
Ignore DTR: Ignore DTR:
CmInActTm:
(COM Port Inactivity (COM Port Inactivity
Timeout)
CmDiscTm:
(COM Port (COM Port
Disconnect Time)
Modem Use:
Modem Type: Modem Type:
Modem Rate: Modem Rate:
MChar Len: MChar Len:
MParity: y
MStop Bits: MStop Bits:
LSpaceDsc: LSpaceDsc:
MoInActTm: MoInActTm:
Factory 1
1
1.5
2
Yes
No
Enab
Disab
5
Up
Down
Save
Mgmt
ASCII
Term
Async
Sync
1.2
2.4
7
8
None
Even
Odd
1
2
Enab
Disab
Enab
Disab
Factory 2
1
1.5
2
Yes
No
Enab
Disab
5
Up
Down
Save
Mgmt
ASCII
Term
Async
Sync
1.2
2.4
7
8
None
Even
Odd
1
2
Enab
Disab
Enab
Disab
8
Comments/Description
Selects the number of stop bits for
the COM port. the COM port.
Specifies whether the COM port Specifies whether the COM port
ignores DTR.
Specifies whether the p
communication port disconnects communication port disconnects
after a certain period of inactivity.
Specifies the period of inactivity
(1 to 60 minutes) that causes a (1 to 60 minutes) that causes a
disconnect if CmInActTm is
enabled.
enabled.
Specifies how the modem port is
used. used.
Specifies whether the port uses
synchronous or asynchronous synchronous or asynchronous
operation.
Specifies the bit rate for the Specifies the bit rate for the
modem port (in kbps).
Specifies the character length (in Specifies the character length (in
bits) for the modem port.
Specifies the parity for the modem S ifi th it f
port. port.
Specifies the number of stop bits Specifies the number of stop bits
for the modem port.
Controls whether the modem
sends a long space before it sends a long space before it
disconnects.
Specifies whether the modem port
disconnects after the period of disconnects after the period of
inactivity specified by MoDiscTm.
th d