Paradyne ACCULINK
3150 Quick Reference page 8

Table 2. Network Interface Configuration Options (2 of 2)
Option
NET LLB: NET LLB:
NET PLB: NET PLB:
BitStuff: BitStuff:
KeepAlive: KeepAlive:
Yellow: Yellow:
Circuit Ident: Circuit Ident:
CRC PThru CRC PThru
(Passthrough):
Table 3. General Configuration Options
Option
Tst Timeout: Tst Timeout:
Tst Duration: Tst Duration:
Factory 1
Enab
Disab
Enab
Disab
N/A
AIS
One (Framed
All Ones)
NetLp
(Loopback of
network signal)
Enab
Disab
Edit
Clear
Enab
Disab
Factory 1
Enab
Disab
10
Up
Down
Save
Factory 2 Comments/Description
Enab
Network-initiated LLB allows LLB to be Network-initiated LLB allows LLB to be
controlled by inband LLB codes.
Disab
N/A N/A Network-initiated PLB allows PLB to be Network-initiated PLB allows PLB to be
controlled by FDL PLB messages.
62411
Available if NET Coding is AMI, Available if NET Coding is AMI,
enforces ONEs density protection.
Disab
AIS
One (Framed
Specifies the keep alive signal to send
All Ones)
to the network interface on a failure of to the network interface on a failure of
the DTE signal.
NetLp
(Loopback of
network signal)
Enab
Transcodes and sends Yellow signal to
the network on receiving Yellow from the network on receiving Yellow from
Disab
DTE.
Edit
Specifies the transmission vendor's Specifies the transmission vendor s
circuit identifier.
Clear
Enab
Determines whether framing bits are Determines whether framing bits are
passed to the DTE.
Disab
Factory 2
Enab
Disab
10
Up
Down
Save
6
Comments/Description
Specifies whether user-initiated
tests are limited by the Tst Duration tests are limited by the Tst Duration
configuration option.
Specifies in minutes the duration of Specifies in minutes the duration of
user-initiated tests.
g