Paradyne ACCULINK
3150 Quick Reference page 7

Factory default configuration options are shown in boldface type in the following tables.
Table 1. DTE Interface Configuration Options
Option
DTE Framing: DTE Framing:
DTE Coding: DTE Coding:
Equal: Equal:
(DTE Line
(DTE Line
Equalizer) E li )
Extrn DLB:
(External DTE (External DTE
Loopback)
Send AIS: Send AIS:
Yellow: Yellow:
Table 2. Network Interface Configuration Options (1 of 2)
Option
NET Framing: NET Framing:
NET Coding: NET Coding:
LBO: LBO:
ANSI PRM: ANSI PRM:
Mgmt Link: Mgmt Link:
Factory 1 Factory 2
D4
ESF
AMI
B8ZS
0–133
133–266
266–399
399–533
533–655
Enab
Disab
Enab
Disab
Enab
Disab
Factory 1 Factory 2
D4
ESF
AMI
B8ZS
0.0
–7.5
–15.0
–22.5
Enab
Disab
Enab
Disab
Comments/Description
D4
Selects D4 or ESF framing format Selects D4 or ESF framing format.
ESF
AMI
Selects AMI or B8ZS line coding Selects AMI or B8ZS line coding
format.
B8ZS
0–133
133–266
Selectable extended DTE range
266–399
capability.
capability.
399–533
533–655
Enab
Allows control of DLB on external Allows control of DLB on external
contact closure.
Disab
Enab
Sends AIS to the DTE on failure of the Sends AIS to the DTE on failure of the
Network interface signal.
Disab
Transcodes and sends Yellow signal to
Enab
the DTE on receiving Yellow from the the DTE on receiving Yellow from the
Disab
Network.
Comments/Description
D4
Selects D4 or ESF framing format Selects D4 or ESF framing format.
ESF
AMI
Selects AMI or B8ZS line coding Selects AMI or B8ZS line coding
format.
B8ZS
0.0
–7.5
Line Build Out in dB. Line Build Out in dB
–15.0
–22.5
N/A N/A Sends ANSI Performance Report Sends ANSI Performance Report
Messages.
Enab
Specifies whether the FDL s Specifies whether the FDL's
Management Link is enabled.
Disab
5