Siemens SIMATIC S7-1500 System Manual page 438

Regarding ②: Names of the menus
The following table shows the available menus of the display.
Table 13- 2 Names of the menus
Main menu items
S7-1500R/H redundant system
System Manual, 01/2024, A5E41814787-AF
Meaning Description
Overview The "Overview" menu contains information about:
• Properties of the local CPU
• Properties of the F-CPU
–
–
–
• Redundancy properties, for example
–
–
–
• Properties of the inserted SIMATIC memory card
Diagnostics The "Diagnostics" menu includes:
• Display of alarms
• Display of the diagnostics buffer
• Read and write access to force and watch tables
• Display of cycle time
• Display of memory used
Settings In the "Settings" menu you:
• Assign IP address and PROFINET device name of the CPU
• Setting date/time
• Set operating states (RUN/STOP)
• Perform a CPU memory reset or reset to factory settings
• Disabling and enabling passwords
• Disable/enable display with display password
• Format SIMATIC memory card
• Run firmware update and display status
• Convert SIMATIC memory card or delete user program
Modules The "Modules" menu is not supported for R/H-CPUs.
Display In the "Display" menu you can configure settings related to the display, such
as language setting, brightness and energy-saving mode. The energy-saving
mode dims the display. Standby mode switches off the display.
Status of the safety mode
Collective signature
Date of the last changes
Display of role (primary CPU or backup CPU)
Displaying and setting the redundancy ID
Display of the pairing state
Display
13.1 CPU display
437