Basic Operations; Basic Playback - Zenith DA3520 Operating Manual

Basic Playback

This section shows you the basics on how to play back a DVD video disc.
4 2 3
1
2
5
Example of interactive
DVD On-Screen Menu
BASIC OPERATION
Preparations
When you want to play back DVD video discs, turn on the TV and
select the video input source connected to the DVD receiver.
When you want to enjoy the sound of DVD video discs or audio
CDs from the audio system, turn on the audio system and select
the input source connected to the DVD receiver.
For connection details, see pages 12 through 14.
Set the playback picture size according to the aspect ratio of the
connected TV at the SET-UP menu (TV Aspect).
Press POWER.
1
The DVD receiver turns on and the display window
lights.
Press FUNCTION on the front panel repeated-
2
ly or CD/DVD on the Remote control to select
the CD/DVD function mode.
Press OPEN/CLOSE.
3
The disc tray opens.
You can open the disc tray by pressing this button even if the DVD
receiver is in standby mode.
Place a disc on the disc tray with the
4
playback side down.
There are two different disc sizes. Place the disc in the
correct guide on the disc tray. If the disc is out of the guide,
it may damage the disc and cause the DVD receiver to
malfunction.
Do not place anything except 3" discs or 5" discs on the disc tray.
Press PLAY.
5
The disc tray is automatically closed and playback
begins.
If the disc is placed in upside down (and it is a single sided disc),
"NO DISC" or "DISC ERROR" appears on the TV screen.
If you insert an audio CD, the CD indicator lights up in the DVD
display. The title number does not appear.
After playing back all of the chapters in the title, the DVD receiver
automatically stops and returns to the menu screen.
When a menu screen appears on the TV screen.
In case of interactive DVDs with control, a menu screen appears on
the TV screen. Perform step 6 on page 16 to start play.
PAGE 15