Connections; Basic Tv Connections; Optional Tv Connections - Zenith DVT723 Installation And Operating Manual

Connections (Continued)

Basic TV Connections

Make one of the following connections, depending on
•
the capabilities of your existing equipment.
Audio/Video connection
Connect the DVD/VCR VIDEO OUT jack on the unit
1 1
to the video in jack on the TV using the supplied
video cable (V).
Connect the Left and Right DVD/VCR AUDIO OUT
2 2
jacks on the unit to the audio left/right in jacks on
the TV (A) using the supplied audio cables.
otes
• If you use this connection, set the TV's source selector to
VIDEO.

Optional TV Connections

ote
DVD playback can also be done using the COMPONENT/
PROGRESSIVE SCAN VIDEO OUT connection options
below. The VCR ONLY output through the DVD/VCR
OUT (A, V) jack. (See left)
Component Video connection
Connect the COMPONENT/PROGRESSIVE SCAN
1 1
VIDEO OUT jacks on the unit to the corresponding
in jacks on the TV using Y Pb Pr cables (C).
Connect the Left and Right AUDIO OUT jacks of
2 2
the unit to the audio left/right in jacks on the TV (A)
using the supplied audio cables.
Progressive Scan connection
If your television is a high-definition or "digital ready"
•
television, you may take advantage of the unit's
progressive scan output for the highest video
resolution possible.
If your TV does not accept the Progressive Scan
•
format, the picture will appear scrambled if you try
Progressive Scan on the unit.
Connect the COMPONENT/PROGRESSIVE SCAN
1 1
VIDEO OUT jacks on the unit to the corresponding
in jacks on the TV using Y Pb Pr cable (C).
Connect the Left and Right AUDIO OUT jacks of
2 2
the unit to the audio left/right in jacks on the TV (A)
using the supplied audio cables.
otes
Set the Progressive Scan to "On" on the DVD setup
•
menu for progressive signal, see page 19.
Progressive scan does not work with the analog video
•
connections (yellow VIDEO OUT jack).
Rear of TV
VIDEO COMPONENT/PROGRESSIVE
AUDIO INPUT
SCAN VIDEO INPUT
INPUT
Pr Pb Y
L R L
A V C
Rear of the unit
11