Speaker System Connection - Zenith DA3520 Operating Manual

Speaker System Connection

Connect the speakers using the supplied speaker cords by matching the colors of the terminals and those of the
cords. To obtain the best possible surround sound, adjust the speaker parameters (distance, level, etc.)
If you feel lack of bass frequency
Connect an active subwoofer to the WOOFER
OUT connector using a monaural audio cord
(not supplied). When you connect an active
subwoofer, disconnect the woofer from the
WOOFER speaker connector.
Subwoofer
(Not supplied)
Red Cord White Cord (right surround)
Red Black
Notes
Be sure to match the speaker cord to the appropriate terminal on the components: + to + and – to –. If the cords are reversed,
the sound will be distorted and will lack base.
If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers.
Do not disassemble the front cover of supplied speaker.
Front speaker
(right)
Rear speaker Rear speaker
(left surround)
CONNECTIONS
Front speaker
(left)
Red Black
Center
speaker
Subwoofer
PAGE 13