Zoom Feature; Sleep Timer Setting - Zenith DA3520 Operating Manual

Zoom feature

The Zoom feature allows you to "ZOOM-IN" and
enlarge the picture on the screen to either 4 times (X4)
or 16 times (X16) its normal size.
3
2
1, 4
X4
(X4) (X16)

Sleep Timer Setting

You can set the DVD receiver to turn off automatically
at a specified time.
X16
(Normal)
1, 2
ADVANCED OPERATION
Press ZOOM during normal playback or
1
still playback.
• The square frame will be displayed in the center of
the picture. If no button is pressed for more than 10
seconds, the square frame will disappear.
• Each press of the ZOOM button changes the TV
screen in the left sequence.
• The magnification level will be displayed in the upper
right corner of the zoom area.
If you press D D / E E / F F
2
point shifts.
Press ENTER.
3
The selected frame is displayed in full size on the
TV screen.
To resume normal playback.
4
Press ZOOM repeatedly until the normal picture
appears.
Notes
Some discs may not respond to the Zoom feature.
Zoom does not work on subtitles or menus included on
DVD video discs.
Press SLEEP to set the desired sleep
1
time.
The SLEEP indicator and sleep time appears in
the display window.
2 Each time you press SLEEP, it is
changed as the following order.
SLEEP 120 90
For your reference
• You can check the time remaining before the DVD
receiver turns off.
Press SLEEP. The remaining time appears in the
display window.
PAGE 27
/ G G buttons, the zoom
60 30 OFF 120