Zenith DA3520 Operating Manual page 40

PAGE 40 INITIAL SETTINGS
Selecting rating level and password (Cont'd)
2, 3
2, 3
1
To clear your 4-digit password
If you forget your password, to clear the
current password, follow the procedure below.
At the SET-UP screen
1
E E
Press to select "Password" item.
2
Enter 6-digit number "210499" and
then press ENTER.
The 4-digit password is cleared.
3
Enter a new password
Refer to "Setting your password" section on the
right.
Setting your password (DVD only)
If you change the rating level to "7" or lower, you must enter
a 4-digit "password" to prevent playback of discs with higher
ratings.
At the SET-UP screen, press
1
"Password" and press
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Input a 4-digit password and press ENTER.
2
Example : 1234
Do not forget your password.
Input the 4-digit password again and press
3
ENTER to verify.
Setting is finished.
The rating is locked. Any disc whose rating is higher than
the setting, cannot be played back unless the correct
password is entered.
To change/clear memorized password
At the SET-UP screen, press
1
"Password" and press
Input your password and press ENTER.
2
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
To change or clear your password, press
3
to select the "Change" or "Clear" and press
ENTER.
To change the rating level/password, follow the steps on
page 39-40 again.
E E
to select
G G
.
New
— — — —
E E
to select
G G
.
Change
Clear
D D / E E