Memorizing Settings For Viewed Dvds - Zenith DA3520 Operating Manual

PAGE 22 ADVANCED OPERATION
Memorizing Settings for Viewed DVD (Last Condition Memory)
This unit stores, in memory, settings for the last
DVD you have watched. Settings remain in
memory even if you remove the disc from the
DVD receiver, or switch power to OFF. If you
load a disc that has its settings memorized, the
"Resume disc from last position?" message will
appear on the TV screen. When you start play-
ing the disc, the memorized settings are auto-
matically recalled.
2
You can memorize details for the following six settings.
Last Stop Position (Page 17)
TV Aspect (Page 41)
Disc Subtitle Language (Page 23, 38)
Disc Audio Language (Page 23, 38)
Disc Menu Language (Page 42)
Angle (Page 24)
Load the DVD that was memorized.
1
It will appear on the TV screen as below
• If the screen is left for more than 10 seconds, playback will
start from the beginning of the title automatically.
Resume disc from
last position?
1. No
F F G G
Press / to select "Yes" and press ENTER.
2
The memorized settings are automatically recalled.
Notes
Settings are stored in memory for use any time.
You can store settings for up to 1 DVD in memory. If you memo-
rize settings for more than 1 DVD previously memorized settings
are erased in order from the last memorized settings.
Subsequently, if you try to call up these previously memorized
settings, you will get the latest settings that have taken their
place.
Switching of the audio mode etc., is automatic on some discs.
This unit does not store settings in memory, if you remove the
disc from the DVD receiver or switch power to the DVD receiver
OFF when DVD or title menu is displayed on the TV screen.
2. Yes