Advertisement
Quick Links
Sch. 1723/46
Keypad programming guide
Note there are NO DEFAULT CODES in the 1723/46 keypad and
Urmet do not have any record of the Engineer's Password.
If you do not know the Engineer's Password, then it will be
necessary to gain access to the rear of the keypad
Advertisement
Related Manuals for urmet domus 1723/46
Summary of Contents for urmet domus 1723/46
- Page 1 Sch. 1723/46 Keypad programming guide Note there are NO DEFAULT CODES in the 1723/46 keypad and Urmet do not have any record of the Engineer’s Password. If you do not know the Engineer’s Password, then it will be necessary to gain access to the rear of the keypad...
- Page 2 There are two possibilities when programming the 1723/46 keypad; 1. You know the Engineer’s Password (3 to 8 digits). In this case the keypad can be programmed without being removed from its housing. 2. You do not know the Engineer’s Password.
- Page 3 To add a Door Open Code Press then enter your chosen Engineer’s Password then press and the BEEP BEEP BEEP button turns from blue to red If you hear one long BEEP instead of three short beeps you must repeat the above until you do hear three BEEPS.