Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for urmet domus 1158/46
Summary of Contents for urmet domus 1158/46
- Page 1 Sch. 1158/46 Keypad programming guide Note there are NO DEFAULT CODES in the 1158/46 keypad and Urmet do not have any record of the Engineer’s Password. If you do not know the Engineer’s Password then it will be necessary to gain access to the rear of the keypad...
- Page 2 There are two possibilities when programming the 1158/46 keypad; 1. You know the Engineer’s Password (3 to 8 digits). In this case the keypad can be programmed without being removed from its housing. See Page 2 2. You do not know the Engineer’s Password.
- Page 3 To change the Door Open Code Press then enter the Engineer’s Password and press (BEEP BEEP BEEP). Press 90 OLD DOOR OPEN CODE then press Enter the new Door Open Code and press Press and hold until you hear a long BEEP to exit programming. To change the Door Open Time Press then enter the Engineer’s Password and press...
Need help?
Do you have a question about the 1158/46 and is the answer not in the manual?
Questions and answers